Kessler MOTION CONTROL: Second Shooter User Manual

SECOND SHOOTER USER GUIDEWHAT YOU’LL NEED• Second Shooter™• Slider• Motor Mount• Camera Control Cable (or external intervalometer)™TABLE OF CONT

THE CONTROLLERa) Menu ButtonNavigate backwards to the previous menu with this button.b) Directional ArrowsThe directional arrows can be used to navi-g

GETTING STARTED: HARDWARE SET-UPSlider Motor1. Choose your desired motor speed by arranging the proper combination of motor pulleys. The metal pin on

NormalSlow (High Torque)4. Mount Slider motor to slider using a Kessler Motor Mount.5. Connect CAT5 cable from Slider motor to the SLIDER port on the

Pan & Tilt Axis1. Mount your Pan & Tilt head utilizing the 3/8”-16 and ¼” – 20 holes on the underside of the Head. (Recommended Mounting: Kess

SETTING UP A MOVEAfter powering up the system you will be presented with four options: • PROGRAM MOVE• MANUAL MOVE• TURNTABLE• SETTINGSSettings•

Now choose one of the following shooting modes:• LOOP/SCRUB• TIME LAPSE• STOP MOTIONLoop/Scrub1. Set TIME and RAMP values by selecting with Enter a

4. Set the RAMP value by selecting with Enter and adjusting with the Up and Down arrows:• Ramp – Percentage value indicates the change in speed of th

UPDATING FIRMWARE 1. Download and extract the attached zip le. There are 2 les within the zip. The one you will need is 2NDSHOOTER.IMG.2